Products

ASN 21-0-0+24S fertilizer

PRODUCTS

CONTACT US

ASN 21-0-0+24S fertilizer

Chemical Name Raison Ammonium Sulfate Nitrate (ASN) Fertilizer
Chemical Formula NH₄NO₃ · (NH₄)₂SO₄ (Composite Salt)
CAS No. 15245-12-2 (Composite) / 6484-52-2 (NH₄NO₃) / 7783-20-2 ((NH₄)₂SO₄)
EINECS No. Declared per component (Mixture)
HS Code 3102.90.90 (Other mineral nitrogenous fertilizers)
Appearance White to yellowish-white, free-flowing hard granules (2–4 mm)
Grade Agricultural Grade
Nutrient Composition 21 – 0 – 0 + 24% S

∟ Total Nitrogen (N): ≥ 21.0%

(Nitrate-N ≥ 10.5% / Ammonium-N ≥ 10.5%)

∟ Sulfur (S): ≥ 24.0% (as SO₄²⁻)

Packaging 9.9 kg / 25 kg / 50 kg bags, 1000 kg Jumbo bags, or Bulk on request
Certificate / Standard GB/T 2945, ISO 9001, SGS / CIQ Inspected

 

ASN Fertilizer Description


 

Raison Chemical —— Agricultural Ammonium Sulfate Nitrate (ASN 21-0-0+24S)​ is a specialized high-sulfur nitrogen fertilizer engineered for crops with elevated sulfur demands and for soils suffering from severe sulfur deficiency. Featuring a synergistic blend of readily available nitrate-nitrogen and retained ammonium-nitrogen, fortified with an impressive 24% plant-available sulfur, this formulation is the definitive solution for maximizing oil content in rapeseed, enhancing baking quality in wheat, and improving flavor profiles in alliums (onions, garlic). Its slightly acidic nature makes it exceptionally effective on calcareous and alkaline soils, unlocking micronutrients and optimizing the rhizosphere for robust crop development.

 

Technical Specifications Table


 

Parameter Specification Test / Standard
Total Nitrogen (N) Content ≥ 21.0% (on dry basis) ISO 15960 / GB/T 2945
Nitrate Nitrogen (NO₃⁻-N) ≥ 10.5% Titration
Ammonium Nitrogen (NH₄⁺-N) ≥ 10.5% Distillation
Sulfur (S) Content ≥ 24.0% Gravimetric
Moisture Content ≤ 0.5% Oven Dry Method
Appearance White to yellowish-white, free-flowing granules; no visible foreign matter Visual
Colour White to slight yellowish-white
Odour Slight characteristic ammonia odour
Melting Point Decomposes before melting (>200°C)
Bulk Density 0.95 – 1.05 kg/L (Granular) ISO 913
Specific Gravity 1.70 g/cm³ at 25°C
pH (10% aq. solution, 25°C) 5.0 – 6.0 (Slightly Acidic) ISO 3423
Solubility in Water ~750 g/L at 20°C (100% water-soluble)
Free Ammonia (NH₃) ≤ 200 p.p.m. Titration
Radiation Non-radioactive

 

Key Benefits of Raison ASN 21-0-0+24S


1. Ultra-High Sulfur Formula (24% S) for S-Hungry Crops

Specifically engineered for oilseeds (rapeseed/canola), alliums (garlic, onion), and legumes where sulfur is the yield-and-quality limiter. The 21:24 N:S ratio (~1:1.14) closely matches the uptake pattern of high-sulfur crops, maximizing oil content in canola and pungency/flavor compounds in alliums.

2. Dual-Action Nitrogen (Nitrate + Ammonium, 21% N)

Balanced 10.5% nitrate-N for instant green-up and 10.5% ammonium-N for sustained feeding. Compared to straight urea, ASN reduces nitrogen leaching and volatilization losses, improving Nitrogen Use Efficiency (NUE) especially in sandy or high-rainfall zones.

3. Soil pH Conditioner for Alkaline & Calcareous Soils

With pH 5.0–6.0 (slightly acidic), ASN 21-0-0+24S actively lowers rhizosphere pH in alkaline soils, unlocking locked-up micronutrients (Fe, Mn, Zn) that are critical for chlorophyll formation and disease resistance.

4. Physically Superior Hard Granules (2-4mm)

Uniform size and high crushing strength deliver pin-point spread accuracy at 24–36m boom widths. Minimal dust protects equipment and operator, while the granule’s integrity prevents segregation in the hopper.

5. 100% Water-Soluble – Fertigation & Foliar Ready

Dissolves completely without residue or sludge. Perfect for modern drip systems, pivot irrigation, and hydroponics. No emitter clogging, no filter backwashing headaches.

6. Export-Grade Compliance & Full Documentation

Classified as Non-Dangerous Goods for smooth international shipping. Every shipment backed by COA, MSDS, SGS/CIQ inspection, and Certificate of Origin for hassle-free customs clearance.

7. Flexible Packaging & OEM Support

9.9 kg / 25 kg / 50 kg laminated woven bags, 1000 kg UV-stabilized jumbo bags, or bulk. Private label/OEM available to build your brand in local markets.

 

At-a-Glance Specs (For Quick Reference)


 

Feature Raison Standard
Total Nitrogen (N) 21% Min
Nitrate Nitrogen (NO₃⁻-N) 10.5% Min
Ammonium Nitrogen (NH₄⁺-N) 10.5% Min
Sulfur (S) 24% Min
Moisture ≤ 0.5%
Form Granular (2-4mm)
pH (10% Solution) 5.0 – 6.0 (Slightly Acidic)
Origin China (Shandong/Qingdao)
Documents COA, MSDS, SGS, CO

Application Methods

Broadcasting: Spread evenly on the soil surface. Incorporate into the soil with light tillage or irrigate within 24 hours to minimize volatilization losses, especially in warm climates. Ideal as a pre-plant basal application for broadacre crops.

Side-Dressing / Banding: Place 5–10 cm beside and below the seed row during active vegetative stages (e.g., rapeseed stem elongation, wheat tillering). Do not place ASN in direct seed contact to avoid ammonium toxicity and seedling injury.

Fertigation: ASN 21-0-0+24S dissolves rapidly and completely. Use a stock solution tank with continuous agitation. Flush drip lines thoroughly after each cycle to prevent salt buildup at the emitters. Recommended as a split application (2–3 times per season) for high-sulfur demand crops.

Foliar Spray (Corrective Use Only): While primarily a soil-applied fertilizer, dilute solutions (1–2%) can be used to correct acute sulfur or nitrogen deficiencies (e.g., interveinal chlorosis). Always perform a jar test before tank-mixing with pesticides. Avoid mixing with strong alkalis (such as Calcium Nitrate or Potassium Carbonate).

 

Precautions & Best Practices

Soil Testing: This is a high-sulfur (24% S) formulation. Base application rates on soil tests showing < 10 ppm available S. Over-application on sulfur-sufficient soils leads to unnecessary costs and environmental load.

Storage: Store in a cool, dry, and well-ventilated area. Although ASN has low hygroscopicity, it can cake under high humidity (>70%). Keep bags sealed until use.

Mixing: Generally compatible with most pesticides and fertilizers. However, avoid mixing with strong alkalis (such as Calcium Nitrate or Potassium Carbonate), which can trigger ammonia volatilization.

Environmental Conditions: Apply when rain is expected within 24 hours or irrigate immediately to wash nutrients into the root zone. Avoid application during heavy rainfall to prevent nutrient runoff.

Safety: Although low in free ammonia (≤ 200 p.p.m.), wear gloves and a dust mask during handling to prevent skin irritation and inhalation of fine particles.

Packing&Shipping


 
Packaging Type Weight Options
Woven PP Bags 9.9 kg, 50 kg
Jumbo Bags 1000 kg (1 MT)
Bulk Delivery Available upon request

A:​ We focus on two core categories:

  • Agricultural fertilizers:​ Urea (46% N, prilled/granular), NPK compound fertilizers, Potassium Nitrate (technical/agri grade) and related potash/blended fertilizers.

  • Industrial & hazardous chemicals:​ organic peroxides/initiators (MEKP, BPO, etc.), corrosive chemicals (e.g. Caustic Soda flakes/liquid, acids), and associated inorganic salts/industrial materials.

    We position ourselves as an integrated supplier​ covering sourcing, quality check, repacking/labeling, warehousing coordination and export documentation.

Q:​ How do you guarantee compliance and smooth customs clearance?

A:​ Compliance is non-negotiable in our segment. For each shipment we can prepare the standard export document set required by most importers:

  • COA / MSDS(SDS)​ per batch

  • Certificate of Origin

  • Commercial Invoice / Packing List

  • When needed: SGS/third-party inspection, quantity & quality reports, and additional certificates (depending on destination & product)

    For hazardous goods (DG), we work within the required DG framework: proper UN marking, DG declarations, and DG-class aware logistics booking from Qingdao/Shanghai/Tianjin.

A:​ Yes—KNO₃ is part of our handled range, but we treat it as what it is: a 5.1 oxidizer​ and a controlled/regulated item in many jurisdictions. We only offer it when the inquiry matches a lawful end-use and the buyer can work with proper DG procedures (correct documentation, compliant packaging, and DG-capable carriers). If you are unsure about your local import permit/license path, tell us your country & HS code requirement and we’ll align the paperwork accordingly.

A:​ Yes. Common options include 25 kg / 50 kg PP woven + PE inner, and FIBC/Jumbo bags (500/1000 kg). We can arrange OEM bag printing​ (your logo, multi-language labels, lot/batch info). For hazardous items, any “custom pack” must still respect DG/UN packaging rules—so we’ll confirm which artwork/labels are feasible before production.

A:​ After deposit & artwork confirmation (if any), typical windows are roughly:

  • In-stock / spot arrangements: 7–15 days​ to readiness

  • Made-to-order / special specs / OEM bags: 15–30 days​ (depends on spec, inspection, DG queue)

    Main export gateways: Qingdao / Shanghai / Tianjin, chosen by cargo type, container equipment and routing cost.

A:​ For most lines we quote against 1×20ft FCL​ as the practical MOQ (to keep unit cost & logistics sane). Smaller LCL lots are possible case-by-case—especially for DG where carriers/permits drive feasibility.

Payment norm: T/T (30% deposit + 70% against copy docs / BL); other terms discussed per client profile & inspected track record.

A:​ Yes. We can arrange small representative samples​ (often courier / local express) for your lab check. For hazardous items, sample channel must follow DG courier rules—sometimes that means higher cost or an alternative arrangement. Sample cost & freight are usually on buyer’s account; refundable against first container in many cases.

Leave Your Message

Still not sure which spec/pack fits your market? Contact Raison Chemical​ with your destination country, HS code and monthly volume—we’ll propose a compliant plan and lead time.

 

Why Choose Raison®  Chemical

 

· Licensed DG Exports​ – Full permits, zero compliance risks.

· Integrated Supply​ – Agro & industrial chemicals, one source.

· Certified Quality​ – SGS/ISO assured with full COA/SDS.

· Qingdao Logistics​ – Faster shipping, lower freight costs.

· Flexible Packaging​ – OEM branding tailored to your market.

滚动至顶部